Filter
Top Products
MAINTENANCE
LIGHTS
4
Replacing Light Bulbs
Make sure all power is turned off and
bulbs
are not hot.
Remove
by turning bulb counter-
clockwise.
If
bulbs are difficult to remove due to pro-
longed
use, firmly attach a glass suction cup
(readily
available at most lighting stores)
approximately the diameter of the bulb and
turn
counter clockwise. You may also use a
rubber
or latex glove to get the same effect.
Replacement
bulbs are available at specialty
lighting
stores. Purchase type GU10 120V
50W
halogen bulbs.
Or
to order bulbs, please call our service
center:1-800-JENNAIR
(1-800-536-6247)
CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot
bulbs
could cause serious burns.