Filter
Top Products
10
4. Align mounting holes and install 5 - 6 x 16 mm screws.
5. Attach power cord connector to connector on wire box on
blower motor mounting plate.
Make Electrical Connection
1. Disconnect power.
2. Locate junction box inside of the range hood.
3. Use UL listed wire connectors and connect black wires (B)
together.
A.Screw
B. Mounting hole
A. Blower motor mounting plate
B. Wire box connector
C. Power cord
A
B
B
C
A
A. Terminal box cover
B. Knockout in canopy
back into terminal box
A. White wires
B.Black wires
C. UL listed wire connectors
D. Green, Bare or Yellow/Green wires
E. Home power supply
F. UL listed or CSA approved
¹⁄₂
" strain relief
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
A
B
A
B
C
D
E
F