Jenn-Air W2780 Convection Oven User Manual


 
Oven Operation- Baking or Roasting
BASIC INSTRUCTIONS
1. Position oven racks.
2. TouchBake Pad orConvection Bake Pad.
3. Turn SetDialto desiredtemperature.
To set oven on bake or convection bake:
1. Place oven racks on proper rack positions. (See p.11 )
2. Touch Bake Pad or Convection Bake Pad.
Indicator Words BAKE or CONV BAKE will flash and 3 dashes will be shown.
NOTE: Ifmore than 10seconds elapse between touching a pad and turning the Set
Dial, the oven is not set and Display will return to previous Display.
3. Turn Set Dial until desired oven temperature appears in the Display.
If Set Dial is turned one click, 325°will appear. The Set Dial can then be turned in
either direction untilthe desired temperature isset. (Allowable range is 140° to550°.)
After 3 seconds the oven will begin to preheat. The Indicator Words ON, PRE, and
either BAKE or CONV BAKE willappear inthe Display. The temperature shown will
be 140° or the oven temperature whichever is higher.
NOTE: The Indicator Word PRE will not appear if the actual oven temperature is
within 100oofthe set temperature.
EXAMPLE: If at 10 o'clock you set the oven for 350° for convection baking, after 3
seconds the Display will show:
I ID.r,r-,
LIU _"
[]
Duringthe preheat, the Displaywillshow a rise in 5° incrementsuntilprogrammed
temperature is reached. When the oven ispreheated, the ovenwill beep, the ON
and PRE IndicatorWords will go off, and programmedoventemperature willbe
displayed.
NOTE: Oven willpreheat forapproximately8 to 12minutes. There willbe no beep
if the PRE IndicatorWord was notshown.
IMPORTANT: Whenever ON appears inthe Display, the oven isheating.
To recall temperature set during preheat: Touch the appropriate Bake or
Convection Bake Pad. Temperature will be briefly displayed, then will automatically
returnto on-going program.
To change temperature set: Touch appropriate pad andturn SetDial tonew desired
temperature.
4. Touch Cancel Pad to turn oven off at end of baking.
10