Filter
Top Products
13
Something not working
If the hob is not working correctly, please carry out the following checks, before contacting your local Service Force repair
agent. In the event of any other fault codes that arise, disconnect the appliance from the electrical supply for a few seconds
(take out the fuse from the housing wiring system). If the fault code is displayed again, please call your local Service Force repair
agent and report the fault code.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a
charge will be made even if the appliance is under guarantee.
Symptom Solution
The cooking zones are not functioning. • If the desired heat setting is not set, set the heat setting.
• Check the fuse.
If the fuses trip a number of times, please call an authorised
electrician.
The residual heat indicator is not displaying anything • The cooking zone was only on for a short time and is there-
fore not hot.
• If the cooking zone is supposed to be hot, call your local
Service Force Centre.