John Lewis JLBIFF 1802 Refrigerator User Manual


 
4
Important Safety Information 2
Description of the appliance 5
Control panel 12
When the Fridge Freezer is first installed 12
Starting your appliance 12
Temperature control 12
Using the freezer 13
Before using 13
Quick-freezing 13
Freezing fresh food 13
Frozen food storage 13
Thawing 13
Making ice cubes 13
Cold accumulators 13
Using the refrigerator 13
Setting the temperature 14
Fresh food refrigeration 14
Normal operating sounds 14
Movable shelves 14
Positioning the door shelves 15
Bottle holder 15
Humidity control 15
Air recycling 15
Hints and Tips 16
Maintenance and Cleaning 17
Internal cleaning 17
When the appliance is not in use 17
Changing the light bulb 17
External cleaning 17
Defrosting 17
Something Not Working 18
Repairs - After Sales Service 19
Installation 6
Technical Specification 6
Electrical Connection 6
Positioning 7
Shelf holders 7
Building In 8
Guide to use the Instruction
Manual
The following symbols will be found in the text to
guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
This appliance complies with the following
E.E.C. Directives:
* 73/23 - 90/683 (Low Voltage Directive);
* 93/68 ("General Product Safety Directive");
* 87/308 (Radio Interference
Suppression);
* 89/336 (Electromagnetic Compatibility
Directive)
and subsequent modifications.
Contents
For the User For the Installer
Defrosting
Refrigerator
The refrigerator automatically defrosts every time the
compressor stops.The water is discharged, via the pipe, into
a tray located at the back of the appliance above the
compressor, where it evaporates.
Important
To avoid defrost water overflowing into the fridge,
periodically clean the water discharge hole in the centre of
the V shaped drip collector at the back of the refrigerator
compartment behind the fruit and vegetable drawer. Use the
defrost cleaner provided which you will find already
inserted into the discharge hole.
Remember to wash the defrost cleaner in hot soapy water
at regular intervals. Dry throughly before replacing.
Freezer
Your appliance is frost free, which means there is no need
to manually defrost your appliance as this will be carried out
automatically.
D037
Before any maintenance or cleaning work is carried
out, DISCONNECT the appliance from the
ELECTRICITY supply.
Internal cleaning
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.
NEVER USE DETERGENTS,
ABRASIVE POWDERS, HIGHLY
PERFUMED CLEANING PRODUCTS
OR WAX POLISHES,TO CLEAN THE
INTERIOR AS THESE WILL DAMAGE
THE SURFACE AND LEAVE A
STRONG ODOUR.
When the appliance is not in
use
When the appliance is not in use for long periods,
disconnect from the electricity supply, empty all
foods and clean the appliance, leaving the doors ajar
to prevent unpleasant smells.
Changing the light bulb
Should the interior light fail to work, first switch off
the appliance and disconnect from the electricity
supply, then replace the bulb as follows;
External cleaning
Once or twice a year dust the condenser (black
grill) and the compressor at the back of the
appliance, with a brush or vacuum cleaner, see
figure, as an accumulation of dust will affect the
performance of the appliance and cause excessive
electricity consumption.
PR259
press on the rear hook and at the same time slide the cover in
the direction indicated by the arrow.
Unscrew the bulb and replace it with one of the same
power (the maximum power is shown on the light diffuser)
available from your nearest Service Force Centre.
Replace the light cover by sliding it into its original position.
Maintenance and Cleaning
17