Filter
Top Products
To deactivate the Multi tab
function and use separately
detergent, salt and rinse aid
1. Press the Multi tab button, the Multi tab
indicator goes off. The function has been
deactivated.
2. Fill the salt container and the rinse aid
dispenser.
3. Adjust the water hardness to the highest
level.
4. Perform a washing programme without
loading any dishes.
5. When the washing programme is
completed, adjust the water softener to
the water hardness in your area.
6. Adjust the rinse aid dosage.
Select and start a washing
programme
Starting the washing
programme without
delay start
1. Switch on the appliance. Make sure that
the appliance is in setting mode.
2. Select a washing programme. Refer to
'Washing programmes'.
• The related programme number
flashes in the display.
3. Close the appliance door. The washing
programme starts automatically.
Starting the washing
programme with delay
start
1. Switch on the appliance. Make sure that
the appliance is in setting mode.
2. Select a washing programme.
3. Press the delay start button until the
display shows the hours for the delay
start.
• The hours flash in the display.
• The delay start indicator comes on.
4. Close the appliance door. The
countdown starts automatically.
• When the countdown is completed,
the washing programme starts
automatically.
The opening of the appliance door
interrupts the countdown. When you
close the door, the countdown
continues from the point of
interruption.
Cancelling the delay
start
The appliance door is still open and
the countdown has not yet started
1. Press the delay start button until the
display shows the number of the
selected washing programme.
• The programme number flashes.
2. Close the appliance door. The washing
programme starts automatically.
The appliance door is closed and the
countdown is in progress
1. Open the appliance door.
20