Filter
Top Products
14
Electrical Connection
Any electrical work required to install this
appliance must be carried out by a quali-
fied electrician or competent person.
This appliance must be earthed.
The manufacturer declines any
liability should these safety measures
not be observed.
Electrical Requirements
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the appliance
rating plate.
The appliance is supplied with a 13 amp plug fitted. In
the event of having to change the fuse in the plug sup-
plied, a 13 amp ASTA approved (BS 1362) fuse must
be used.
Should the plug need to be replaced for any reason,
the wires in the mains lead are coloured in accordance
with the following code:
Green and Yellow - Earth
Blue - Neutral
Brown - Live
The wire coloured green and yellow must be connec-
ted to the terminal marked with the letter ‘E’ or by the
earth symbol or coloured green and yellow.
The wire coloured blue must be connected to the ter-
minal marked ‘N’ or coloured black.
The wire coloured brown must be connected to the ter-
minal marked ‘L’ or coloured red.
Upon completion there must be no cut, or stray strands
of wire present and the cord clamp must be secure
over the outer sheath.
Important
If the mains supply cable is damaged it must be repla-
ced; contact our extended warranty administrators on
0870 0107887 who will give you details for your local
Service Force centre.
WARNING
A cut off plug inserted into a 13amp socket is a
serious safety (shock) hazzard. Ensure that the cut
off plug is disposed of safely.