John Lewis JLFFW2012 Refrigerator User Manual


 
b1
b2
b3
11. Disassemble the door locking elements
(d2,d3) by unscrewing the screw (d4) .
d2
d4
d3
d5
d6
12. Remove stoppers in both doors (d5,d6) .
13. Reverse the door locking elements
(d2,d3) , move to the other side of the
other door and fix by screwing in the
screw (d4) .
14. Re-insert the stoppers (d5,d6) on the
other side of the doors.
15. Remove the left-hand cover pin of the
middle hinge (m3,m4) and move to the
other side.
16. Fit the pin of the middle hinge (m5) into
the left-hand hole of the lower door.
17. Re-insert the lower door on the pivot pin
(b2).
18. Re-screw the middle hinge (m1) on the
opposite side . Do not forget the plastic
spacer (m2) inserted under the middle
hinge.
19. Re-insert the upper door on the middle
hinge (m5).
Make sure that the edges of the doors run
parallel to the side edge of the appliance.
20. Position and fix the upper hinge (you can
find them in the instruction for use bag)
on the opposite side (t6).
t6
t7
21. Insert the panel (t7) (that can be found in
the instruction for use bag).
22. Open the upper door, attach the top
cover (t2) using screws (t1). Insert the
magnet (d7). Close the door.
23. Reposition, level the appliance, wait for
at least four hours and then connect it to
the power socket.
24. Unscrew the handles (h1) and fix them on
the opposite side.
25