Filter
Top Products
15
Something Not Working
If the appliance is not working correctly, please carry out the following checks before contacting your local Service Force
agent.
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
Symptom
No power to the appliance
The temperature in the appliance is too
high
The temperature in the appliance is too low
Excessive frost and ice has built up
The appliance is noisy.
Water under the salad drawer.
Solution
Check there is power at the socket.
Check there is not a power cut by checking the household lights.
Check the fuse has not blown.
Check the thermostat control knob setting is not off.
Check the ambient temperature is within the appliances operating limits
of 10 °C to 32 °C.
Check that the thermostat control knob is turned to the correct setting
relative to ambient conditions.
Set the thermostat control knob to a warmer position.
Check the door has not been left open.
Check nothing is preventing the door from closing.
Check the door gasket is intact and clean.
Check if the appliance stands stable (all four feet should be on the floor).
Check the drain hole is not blocked (see 'Maintenance and Cleaning').