Jura Capresso 13429 Coffeemaker User Manual


 
14
MACHINE RINSING
The coffee spout (18) is rinsed.
13. Programming
The IMPRESSA leaves the factory with a number of default
settings that allow you to make coffee without having to pro-
gram the machine first. You can, however, adjust various
parameters to make the coffee suit your personal taste.
The following parameters can be adjusted:
ț Filter
ț Water hardness
ț Rinse
ț Powder quantity
ț Water quantity
ț Temperature
ț Water portion
ț Steam portion
ț Economy mode
ț Time
ț Automatic switch-on time
ț Automatic switch-off time
ț Language
ț Display
ț Information (to be viewed only)
13.1 Programming the filter
Please refer to Chapter 5 “Using the CLARIS plus filter cartridge”.
13.2 Programming your machine to the correct
water hardness (only with FILTER NO)
Please refer to Chapter 4 “Adjusting your machine to the water
hardness”.
13.3 Maintenance
You can activate the following maintenance functions from this
program item:
RINSE MACHINE, CLEAN MACHINE, DE-SCALE MACHINE,
CHANGE FILTER.
“DE-SCALE machine” is not displayed if you are using a CLARIS
plus filter and the filter is set to “YES”.
“CHANGE FILTER” is not displayed if you are not using a
CLARIS plus filter and the filter is set to “NO”.
SELECT PRODUCT
Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (4) until the following message is dis-
played:
RINSE
Now press the Rotary Switch (4) to start programming.
RINSE
MACHINE
Turn the Rotary Switch (4) until the required maintenance func-
tion (for selection see above) is displayed. Press the Rotary
Switch (4) to activate the function.
The Maintenance menu closes automatically after 5 seconds
if no function is selected.
13.4 Programming the amount of powder for coffee
and espresso
You can adjust the amount of powder for coffee and espresso
separately.