Filter
Top Products
10
15.2 Programming Temperature
Ⅲ : ADJUST TEMPERATURE / SELECT PRODUCT
Ⅲ Press the required draw-off key.
Ⅲ : (selected product)
STAND. TEMP.
Ⅲ Select the required temperature with the keys or (high or
standart)
Ⅲ To store, press the key PROG.
Ⅲ : ADJUST TEMPERATURE / SELECT PRODUCT
Ⅲ Press the required draw-off key, the key in order to reach the
next phase or the key EXIT to quit the programming.
15.3 Programming amount of water
Ⅲ : ADJUST WATER QUANTITY / SELECT PRODUCT
Ⅲ Press the required draw-off key.
Ⅲ : (selected product)
WATER 90 ML
Ⅲ You can change the value by pressing the key or .
Ⅲ To store, press the key PROG.
Ⅲ : ADJUST WATER QUANTITY / SELECT PRODUCT
Ⅲ Press the required draw-off key, the key in order to reach the
next phase or the key EXIT to quit the programming.
15.4 Programming amount of milk
Ⅲ : ADJUST MILK QUANTITY / SELECT PRODUCT
Ⅲ Press the key or
Ⅲ : (selected product)
10 SEC.
Ⅲ You can alter the time by pressing the keys or (draw-off
time from 3 – 60 sec.)
Ⅲ To store, press the key PROG.
Ⅲ : ADJUST MILK QUANTITY / SELECT PRODUCT
Ⅲ Press the required draw-off key, the key in order to reach the
next phase or the key EXIT to quit the programming.
15.5 Programming portion of hot water
Ⅲ Place a cup under the pivoting nozzle (18).
Ⅲ : HOT WATER PORTION / PRESS FOR HOT WATER
Ⅲ : ENOUGH HOT WATER ? / PRESS FOR HOT WATER
Ⅲ : HOT WATER PORTION / PRESS FOR HOT WATER
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
15.6 Programming water hardness
Ⅲ : WATER HARDNESS
LEVEL 3
Ⅲ Press the key PROG.
Ⅲ You can set the water hardness by pressing the keys or .
Ⅲ To store, press the key PROG.
+
-
+
-
+
-
+
+
+
+
-
+
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
To determine the water hardness, please read Chapter 8
“Setting the water hardness”
15.7 Programming CLOCK
Programming the clock is necessary if the function “Machine on” is
used.
Ⅲ : TIME.
—:—
Ⅲ Press the key PROG.
Ⅲ By pressing the keys or you can set the hours.
Ⅲ To store, press the key PROG.
Ⅲ By pressing the keys or you can set the minutes.
Ⅲ To store, press the key PROG.
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
15.8 Programming machine on
Programming the clock is necessary if the function “Machine on” is
used.
Ⅲ : UNIT
ON —:—
Ⅲ Press the key PROG.
Ⅲ By pressing the keys or you can set the hours.
Ⅲ To store, press the key PROG.
Ⅲ By pressing the keys or you can set the minutes.
Ⅲ To store, press the key PROG.
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
The display —:— means that the function is switched off.
15.9 Programming machine off
Ⅲ : UNIT OFF
5.0 HRS.
Ⅲ Press the key PROG.
Ⅲ By pressing the keys or you can set the hours (switched off
or 0.5 hrs. – 9 hrs.).
Ⅲ To store, press the key PROG.
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
15.10 Draw-offs
Ⅲ : AUDIT TRAIL (total audit trail)
Ⅲ Press the required draw-off key to inquire the draw-offs.
Ⅲ Press the key in order to reach the next phase or the key EXIT
to quit the programming.
Draw-offs of steam cannot be inquired.
+
-
+
-
+
+
-
+
-
+
+
+
-
+
+