Filter
Top Products
11
If the draw-off key is pressed by mistake, the selection
can be cancelled by pressing the draw-off key. Your
machine rinses.
After each cleaning operation the filler funnel for the 2nd
coffee type should be cleaned.
8. Drawing off steam
The steam can be used for heating liquids and also for frothing
milk for cappuccino. Make sure that the frothing aid (14) is pushed
upwards when heating liquids. When frothing liquids, push the
frothing aid downwards (Fig. 5).
Ⅲ Place a cup under the pivoting nozzle for hot water/steam (13).
Ⅲ Immerse the frothing aid (14) into the milk to be frothed or the
liquid to be heated and turn the selector switch for hot
water/steam (12) to the position.
Ⅲ Immediately after this, press the maintenance key (4).
Ⅲ When you have reached the required quantity of steam, turn the
selector switch for hot water/steam (12) back to the position .
Ⅲ The , symbols light up.
Ⅲ If you would like to draw off a coffee immediately after the
steam, please proceed as described in point 8.1.
The max. draw-off time is about 8 minutes.
A little water will come out first when frothing. It can be let
off before actually drawing off steam. The good result, e.g.
when frothing milk, is not influenced in any way.
At the start of a steam draw-off, there can be splashes. The
pivoting nozzle for hot water/steam gets hot. Please avoid
direct contact with the skin.
8.1 Drawing off steam with the
Profi-Auto-Cappuccino/Caffè Latte (optional E45)
The Profi-Auto-Cappuccino/Caffè Latte is optionally
available. Contact your authorized dealer.
8.2 Return to stand-by
Ⅲ Place a vessel under the pivoting nozzle for hot water/steam
(13).
Ⅲ Press a draw-off key, the symbol lights up on the display.
Ⅲ Turn the selector switch for hot water/steam (12) to the position
.
Ⅲ Draw water off until the flow of water is automatically inter-
rupted and the symbol lights up.
Ⅲ After this, turn the selector switch for hot water/steam (12) back
to the position.
After each steam draw-off, clean the pivoting nozzle with a
damp cloth.
9. Drawing off hot water
Ⅲ Place a cup under the pivoting nozzle for hot water/steam (13)
and turn the selector switch for hot water/steam (12) to the
symbol .
Ⅲ The machine now produces hot water.
Ⅲ To finish the process, turn the selector switch for hot water/
steam (12) back to the position.
At the start of a water draw-off, there can be splashes. The
pivoting nozzle for hot water/steam gets hot. Please avoid
direct contact with the skin.
E