Filter
Top Products
Grinding times (approx.)
MILD .......... 6 to 7 seconds.
NORMAL ... 7.5 to 8.5 seconds.
STRONG..... 9 to 10 seconds.
AROMA-setting "STANDARD" has the shorter grinding times.
AROMA-setting "ROBUST" has the longer grinding times.
When using the 2-Cup button the grinder will always grind
between 9 and 10 seconds.
Please note:
When using the 1-Cup button, the display will first show the
strength setting. When the pre-brew cycle starts, it will show the
actual cup size. At this time you can still change the cup size by
turning the Dial.
When using the 2-Cup button, the display will first show
2 CUPS. When the pre-brew cycle starts, the display shows the
cup size for one cup. At this time you can still change the cup-
size by turning the Dial.
Please note: After the pre-brew cycle you can always stop the
brewing process by pushing the 1-Cup or 2-Cup button. This will
not affect your cup size setting for the next brew cycle.
Important: Never try to pull out the tray as long as the machine
is grinding, brewing or discarding the used coffee. Always wait
until the display shows
READY.
11. USING PRE-GROUND COFFEE
You can also use pre-ground coffee, bypassing the grinder. This
comes in handy if someone requests decaf, sugar coated or
flavored coffee.
• Push the Pre-Ground Coffee Button (Fig. 3h). The display
shows:
FILL POWDER
• Open the lid for the ground coffee funnel (Fig. 1.8) and fill the
funnel with one or two scoops of ground coffee.
Important: Do NOT fill this funnel with instant coffee and do
not use more than two level scoops of coffee.
• Push the 1-Cup or 2-Cup button. The machine will tamp and
brew coffee.
Please note: If you push the scoop button accidentally push
the 1-Cup button. Display shows
ADD MORE POWDER. The
machine will start brewing, stop and return to READY.
Please note: After use of sugar coated or flavored coffee
through the pre-ground coffee funnel you may experience some
flavor transfer when going back to your regular coffee.
• Push and hold the Rinse Button (Fig. 3f) until the display
shows
RINSE.
• The Dial illuminates. Push the Dial (Fig. 3e). The machine will
perform one rinse cycle and the display will return to
READY.
12. USING HOT WATER
READY – 1 OZ. to 16 OZ. – SHUT TAP - READY
This feature allows you to pre-warm your cup, make a cup of tea
or soup or add hot water to your coffee making it weaker.
• Place a cup underneath the frother (Fig. 13).
• Turn the Steam/Water Selector to the water symbol (Fig. 4b).
Hot water will push through the frother. The display shows the
amount of hot water. You can change it from 1 to 16 oz. by
turning the Dial (Fig. 3e) now. The machine remembers the last
setting. When the water flow stops, display shows
SHUT TAP.
• Turn the Steam/Water Selector back to the cup symbol. READY.
Please note: You can always stop the flow of hot water by
turning the dial to the cup symbol.
13.