Jura Capresso F70 Coffeemaker User Manual


 
24
NO
TRAY
READY
Wipe coffee powder tank with a dry cloth after the cleaning
program has finished.
The cleaning operation was completed successfully.
17.1 Cleaning without display request
Press the Rotary Switch (1) until
FILTER –/ߛ appears.
Turn the Rotary Switch (1) until
MAINTENANCE appears.
Press the Rotary Switch (1) to confirm.
RINSE
Turn the Rotary Switch (1) until
CLEAN appears.
Press the Rotary Switch (1) again to confirm.
EMPTY TRAY
The program “Clean” is now active. Now proceed as described
in Chapter 17 from EMPTY TRAY onwards.
18. De-scaling
Your IMPRESSA features an integrated de-scaling program. The
cleaning operation will take some 40 min.
Original JURA de-scaling tablets which are specially de-
signed for the de-scaling program of your IMPRESSA are
available at your authorized dealer. Please note that machine
defects or residues in the water cannot be excluded if you
use inappropriate de-scaling agents.
If the IMPRESSA needs de-scaling, the corresponding mes-
sage is displayed.
You can still draw off coffee or hot water/steam and start the
de-scaling program later.
Before starting the de-scaling program, the machine must be
switched off. Once started, the de-scaling operation must not
be interrupted.
When using the de-scaling agent, immediately remove any
splashes or drips from sensitive surfaces, i.e. natural stone
and wooden surfaces, or take appropriate precautions.
In any case wait until the de-scaling agent is used up and the
tank is empty. Never refill de-scaling agent.
MACHINE CALCIFIED / MACHINE READY
Remove the Professional Cappuccino Frother (15).
Touch the symbol (7).
EMPTY
TRAY
Empty the tray (20).
NO
TRAY
Insert the tray (20) again.
AGENT
IN TANK
Completely dissolve the content of one blister (3 tablets) in a jug
containing 0.5 litres of water, and fill the mixture in the water tank.
Reinstall the water tank.
OPEN TAP
AGENT
IN TANK