Filter
Top Products
*The Professional-Cappuccino Frother is optional with the IMPRESSA S7 avantgarde.
13
IMPRESSA S9 avantgarde: The supplied “Deluxe” milk
pitcher is suited for drawing in the milk.
11.4 Making cappuccino and hot milk with the
Professional-Cappuccino Frother*
Ⅲ Fill the milk pitcher with milk or dip the milk hose directly into
the milk.
Ⅲ Place a cup under the Professional-Cappuccino Frother.
Ⅲ Press the Steam Portion key .
Ⅲ STEAM PORTION
Ⅲ The machine will froth or heat milk according to the time you
programmed (see “Programming the steam portion”, Chapter
13.8)
Ⅲ For cappuccino, turn the selector switch (1, Fig. 7) to (2).
Ⅲ For hot milk, turn the selector switch (1, Fig. 7) to (3).
Ⅲ Now place the cup with the cappuccino froth or hot milk under
the coffee spout (18) and make a coffee of your choice.
11.5 Cleaning the Professional-Cappuccino Frother
and jet*
After heating or frothing milk, you should clean the Profes-
sional-Cappuccino Frother. We recommend cleaning it on a
daily basis.
Your IMPRESSA will not prompt you to clean the Profes-
sional-Cappuccino Frother.
The Professional-Cappuccino Frother and the Easy-Cappuc-
cino Frother are best cleaned using the JURA Auto-Cappuc-
cino cleaner. Please contact an authorized dealer. We recom-
mend cleaning these devices daily.
Ⅲ Fill water into a receptacle and dip the milk hose into it.
Ⅲ Draw steam until the water / steam from the Frother runs clear.
We also recommend regularly disassembling the Frother and
rinsing it under running water.
Ⅲ Remove the Professional-Cappuccino Frother from the IMPRES-
SA and take it apart as shown in Fig. 8.
Ⅲ Thoroughly rinse all the parts of the Professional-Cappuccino
Frother under running water.
Ⅲ Re-assemble the Professional-Cappuccino Frother and attach it
to your IMPRESSA.
12. Switching the IMPRESSA S9/S7 avantgarde off
Switching the IMPRESSA off causes the coffee spout to be rinsed
first. Therefore, please make sure to place a suitable receptacle un-
der the coffee spout (18).
Ⅲ SELECT PRODUCT
Ⅲ Switch the IMPRESSA off with the ON / OFF key (11).
Ⅲ MACHINE RINSING
Ⅲ The coffee spout (18) is rinsed.
13. Programming
The IMPRESSA leaves the factory with a number of default
settings that allow you to make coffee without having to pro-
gram the machine first. You can, however, adjust various
parameters to make the coffee suit your personal taste.
The following parameters can be adjusted:
ț Filter
ț Water hardness
ț Rinse
ț Powder quantity
ț Water quantity
E