Jura Capresso IMPRESSA X70 Coffeemaker User Manual


 
12
12. Programming
Before leaving our factory, the machine is adjusted to enable you
to obtain coffee without any additional programming. In order to
adapt the result to your personal taste, various settings can be pro-
grammed individually. The programming keys are located behind
the front cover (3).
The following settings can be programmed:
̈ Powder quantity
̈ Brewing temperature
̈ Water quantity
̈ Filter
̈ Water hardness
̈ Economy mode
̈ Timer clock
̈ Automatic switch on time
̈ Automatic switch off time
̈ Supplies and cup counter
̈ Language selection
12.1 Programming POWDER QUANTITY
Switch the machine on by pressing ON/OFF key .
Press key until you can hear an acoustic signal.
POWDER QUANTITY / SELECT KEY
Now press the key that you want to programme. Use the key for
1 cup only. The corresponding quantity for 2 cups is adjusted
automatically by the machine after programming is finished.
POWDER
··········II··········
+
The powder quantity can be selected by pressing keys or
briefly.
To store the new powder quantity in memory briefly press
key .
P
-
+
P
POWDER QUANTITY / SELECT KEY.
You can go to the next setting by pressing key .
12.2 Programming coffee temperature
TEMPERATURE COFFEE / SELECT KEY
Now press the key that you want to programme.
Select the required temperature (high or normal) by activating
key or .
To store the new coffee temperature in memory briefly press
key .
TEMPERATURE COFFEE / SELECT KEY
You can call up the next setting by pressing key .
12.3 Programming water quantity
WATER QUANTITY / SELECT KEY
Put a cup under the coffee-spout (15) and then press the key that
you want to programme.
The selected value is confirmed
Now your machine prepares a coffee.
ENOUGH COFFEE / PRESS KEY
OK?
··········II··········
+
When the required water quantity is reached press key . You
can call up the next setting by pressing key .
There is an additional possibility to alter the water quantity
anew. Press key or for this purpose.
If you wish to draw another coffee to control the water quantity,
press key again otherwise press key briefly to store water
quantity in memory.
You can call up the next setting by pressing key .
+
P
-
+
+
P
P
P
+
P
-
+
+