Filter
Top Products
12
11.2 Constant frothing up of milk
Ⅲ Pour milk into a milk container and immerse the intake-tube in
the milk.
Ⅲ Put a cup under the pivoting nozzle (20) and press key . Your
milk froths up.
Ⅲ STEAM INTAKE
Ⅲ When the required amount of froth has been attained push selec-
tor key anew.
Ⅲ COFFEE READY
With the flow-adjustment (S90/S95) you can set the
optimum frothing. Turn the handle slightly to the right or to
the left until you obtain the required result.
11.3 Drawing off hot milk using the
Profi Auto-Cappuccino/Caffè Latte S9, 601
The Profi Auto-Cappuccino/Caffè Latte of the S9, 601 can be used
to draw off hot milk. Adjust the selector lever (1) (Fig. 10) to
position (3) to draw off hot milk.
Install the Profi Auto-Cappuccino/Caffè Latte. This is in-
cluded in your Welcome Pack.
11.4 Drawing off cappuccino using the
Profi Auto-Cappuccino/Caffè Latte S9, 601
The Profi Auto-Cappuccino/Caffè Latte of the S9, 601 can be used
to draw off capuccino. Adjust the selector lever (1) (Fig. 10) to
position (2) to draw off capuccino.
11.5 Controlling the temperature using the
Profi Auto-Cappuccino/Caffè Latte S9, 601
Adjust the selector lever (1) to for hot milk/cappuccino or for
less hot milk/cappuccino. Individual fine adjustment is possible.
11.6 Cleaning the Auto-Cappuccino
As soon as you have frothed enough milk, it is important to clean
the Auto-Cappuccino.
Fill water in a milk container and immerse the intake-tube in the
water. Now draw off steam until the water/steam mixture flowing
into your cup is completely clean. Your Auto-Cappuccino is clean
again.
Remove Auto-Cappuccino (21). If you do not achieve
optimum results, disassemble the flow controller and the
selector lever (Fig. 10 for S9, 601). Thoroughly rinse these
parts with water.
12. Switching off machine
When the machine is switched off, the rinsing program is auto-
matically run again. Therefore place an empty container under
the coffee-spout (15) and press ON/OFF key . When the rinsing
water has run into the container, the machine powers down. Dis-
card the water.
13. Programming
Before leaving our factory, the machine is adjusted to enable you
to obtain coffee without any additional programming. In order to
adapt the result to your personal taste, various settings can be pro-
grammed individually. The programming keys are located behind
the front cover (3).
-
+