Jura Capresso S95 Coffeemaker User Manual


 
10
Pull down cartridge mounting, until it engages audibly.
Fill water tank with cold, fresh tap-water and replace it.
Switch the machine on by pressing key ON/OFF.
Open front cover (3) and press key until you hear an acoustic
signal.
PRESS KEY / POWDER QUANTITY
Press key several times until the following message appears:
FILTER NO
By pressing key you can hear an acoustic signal.
NO flashes
You can alter the setting by pressing key or .
YES flashes
To confirm press key . An acoustic signal can be heard.
RINSE FILTER / PRESS STEAM
Place a sufficiently large container (approx. 1 litre) under the
pivoting nozzle (20) and press coffee key .
PLEASE WAIT / FILTER RINSING. The drawing
off of water will stop automatically.
FILTER YES
Press key .
COFFEE READY
The water might be slightly discoloured (this is not damag-
ing to the health).
7.2 Replacing of filter
After drawing off 50 litres the filter loses its effect.
REPLACE FILTER
If only a little water is drawn off the filter should be changed every
2 months. However no message will appear on the display. You
will find a special turntable on the cartridge mounting to set the
replacement date.
N
P
+
-
P
+
P
Empty water tank and pull up cartridge mounting. Pressing
lightly, place the filter cartridge in the water tank (Fig. 2).
Pull down cartridge mounting, until it engages audibly.
Fill water tank with cold, fresh tap-water and replace it.
Switch the machine on by pressing key ON/OFF .
Open front cover (3) and press key , until you hear an acoustic
signal.
RINSE FILTER / PRESS STEAM
Place a sufficiently large container (approx. 1 litre) under the
pivoting nozzle (20) and press coffee key .
PLEASE WAIT / FILTER RINSING
COFFEE READY
The water might be slightly discoloured (this is not damag-
ing to the health).
8. Drawing off coffee
Switch the machine on by pressing key ON/OFF .
PLEASE WAIT
RINSE UNIT
Put an empty cup under the coffee-spout (15) and press rinsing
key .
UNIT RINSING
COFFEE READY
Put 1, respectively 2 cups under the coffee-spout and press the
required key. The pre-brew system (I.P.B.A.S.
©
) moistens the
coffee powder, briefly interrupts the flow and then starts the real
brewing process.
You can interrupt the flow of coffee at any time by simply
pressing any of the coffee keys.
To obtain a perfect layer of froth adjust the coffee-spout (15)
to the size of your cups.