Filter
Top Products
18
Put a sufficiently large container under the coffee-spout (15)
in order to prevent cleaning liquid from running into the drip
tray.
Ⅲ ADD TABLET (Fig. 9) / PRESS CLEANING
Ⅲ UNIT CLEANING / PLEASE WAIT
Ⅲ EMPTY TRAY
Ⅲ PLEASE WAIT
Ⅲ RINSE UNIT
Ⅲ COFFEE READY
The powder funnel for pre-ground coffee should be cleaned
after each cleaning process. Remove it from the machine,
rinse it with hot tap water and replace it after drying.
16. Decalcifying
Your machine has an integrated decalcifying program. It lasts
approx. 50 minutes.
Please use Jura decalcifying tablets only. These are available from
your Jura dealer.
Run the decalcifying program only after the machine has
been switched off for at least 5 hours and has cooled down
completely. The running decalcifying program must not be
interrupted.
If using acidic decalcifying agents be sure to immediately re-
move any splashes and drops from delicate surfaces, especi-
ally natural stone and wooden surfaces, or take correspond-
ing precautions.
In any case please wait until the filled decalcifying agent is
used up and the tank is empty. Never top up the decalcifying
agent.
Ⅲ Remove and empty water tank.
Ⅲ Replace empty water tank.
Ⅲ Switch off your machine by pressing ON/OFF key and let it
cool down for approx. 5 hours.
Ⅲ Open cover (3).
Ⅲ Press key until you can hear an acoustic signal.
Ⅲ EMPTY TRAY
Ⅲ AGENT IN TANK
Pour 0.6 litres of water into a container and completely dis-
solve the contents of a blister pack (2 tablets). Then fill the
mixture into the water tank.
Ⅲ AGENT IN TANK / OPEN TAP / PRESS CALC
Place a sufficiently large container under the pivoting nozzle
(20). Remove the Profi Auto-Cappuccino/Caffè Latte.
Ⅲ Turn selector switch for coffee (19) to the symbol and press
key .
Ⅲ UNIT DECALCIFYING / PLEASE WAIT
Ⅲ When an acoustic signal is heard place a container under the
height-adjustable tea-spout (22).
Ⅲ PRESS CALC
Ⅲ UNIT DECALCIFYING / PLEASE WAIT
Ⅲ CLOSE TAP
Ⅲ UNIT DECALCIFYING / PLEASE WAIT
Ⅲ Inside the machine the decalcifying agent is conducted to the
drip tray.
Ⅲ EMPTY TRAY
Ⅲ FILL WATER
Ⅲ Place a container under the pivoting nozzle (20).
Ⅲ OPEN TAP
Ⅲ PRESS CALC