Filter
Top Products
16
13.14 Program key
By using key you can set back the following settings (powder
quantity, coffee temperature, water quantity, steam portion, tea
portion) to their original standard settings.
Ⅲ COFFEE READY
Ⅲ Press key until you can hear an acoustic signal.
If a mistake occurs while programming one of the above
settings, just press key and the chosen setting moves back
to its original standard setting.
14. Care and maintenance
14.1 Fill water
Ⅲ FILL WATER
Ⅲ If this message shows on the display no more coffee can be
drawn off. Top up water.
The water tank should be rinsed and filled with fresh water
daily. Only use fresh, cold water. Never top up with milk,
mineral water or any other liquids. You can top up water
without removing tank.
14.2 Empty grounds container
Coffee grounds are collected in the grounds container (23).
Ⅲ EMPTY GROUNDS
Ⅲ If this message shows on the display no more coffee can be
drawn off. It is necessary to empty the grounds container.
Ⅲ Remove drip tray carefully as there is water in it.
Do not disconnect the machine from power socket while
you empty grounds.
N
N
N
N
14.3 Empty drip tray
Ⅲ EMPTY TRAY
Ⅲ If this message shows on the display no more coffee can be
drawn off. It is necessary to empty the drip tray.
Ⅲ Remove drip tray carefully as there is water in it.
14.4 Fill beans
Ⅲ FILL BEANS
Ⅲ Fill beans as described in chapter 3.3.
The message FILL BEANS will only disappear after drawing
off a coffee. We recommend cleaning the bean container
from time to time with a dry cloth before you refill beans.
Switch off the machine for this purpose.
14.5 Removing foreign objects
Ⅲ Switch off your machine by pressing ON/OFF key
.
Ⅲ Remove plug from power socket.
Ⅲ Open bean container (13) and remove the beans. The remaining
beans can be removed with a vacuum cleaner.
Ⅲ Loosen both screws in the bean container and then remove
container (Fig.5 + 6)
Ⅲ Remove any remaining beans with a vacuum cleaner.
Ⅲ Put the spanner on (Fig.7).
Ⅲ Now turn spanner anticlockwise until the foreign object loosens.
Ⅲ Remove remaining powder with a vacuum cleaner.
Ⅲ Replace bean container and fasten screws.