5
USK FP 1 -060213
ASSEMBLY AND USE
• Put the tray (5) on the motor unit (6) (Fig. A) and turn it clockwise
to lock it. Make sure the juice hole on the tray is facing the juice
jug area.
• Put the filter (4) on the tray (5), turn it left and right until it is in the
correct position.
• Put the small cone (3) on the shaft of the motor unit (Fig. B).
• Put the jug on the base.
• Plug in the appliance
• Cut the citrus fruit into 2 pieces, cutting across sections.
• Press gently each half of the fruit on the cone. The citrus press will
start operating automatically by turning to the right and to the
left (Fig. C). If the fruit is too big, please use the big cone. Put the
big cone on the small one. The 2 gaps on the big cone must be
locked on the 2 wings on the small cone.
• Remove the jug from the base. Now you can enjoy delicious
juice.
• When finished, unplug the juicer.