6 USK BL 24242/BL 25280 - 090602
button. This button is only intended for short powerful bursts, not
continued use. You might damage your appliance is using the “Pulse
button” continuously.
Smoothie function
Press “smoothie button”, the blender keeps on running in high speed.
After pressing the “smoothie button” again, the blender will stop
working and all the three indicator lamps will flash.
Ice crushing function
Your blender is equipped with six blades and is perfectly adapted to
ice crushing. Press the “ice button”, the blender runs in 1 second
blending and 0.5 second stop cycles, the pilot light is ON (the other
two indicator lamps are OFF). Once the desired level of grinding is
achieved, press the “ice button” again, the motor will stop working
and all the three indicator lamps will flash.
Note : These three push buttons can be pushed at wish, no
matter what situation it is running. The rotation speed is factory set for
each function, and the rotary speed control is disabled in case the
automatic functions such as “Ice Crushing” or “Smoothie” are
selected. The Blender always runs in high speed in such situation.
• It is also possible to add liquids or other ingredients anytime
without stopping the appliance. You only have to remove the
cap, which closes the feeding opening by turning and raising it
straight up.
• Once you have finished the preparation, stop the appliance and
unplug the appliance.
• Remove the jar from the base. Then remove the lid and pour the
liquid in the desired receptacle.