Filter
Top Products
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity. Print only what is inside the frame.
6 MS 39731 - 120501
Assembly page 6/32
Fax +32 2 359 95 50
HOW TO USE WITH THE CHOPPER BOWL
• Make sure the motor block is disconnected from the power
outlet.
•
Place the chopping blade on the center pin inside the chopper
bowl (4).
– handle with caution because it is sharp!
• Place the chopper bowl on an anti-slip pad.
• Add food in chopper bowl, such as meat, cheese, onions, herbs,
garlic, bread crumbs or crackers, etc.
• Put the chopper lid (5) on the chopper bowl (4), by inserting the
grooves on the side of the lid into the pins inside the wall of the
bowl, and locking it with a twisting motion clockwise.
• Place the motor block (9) onto the chopper’s lid, and lock it in
place by applying a gentle twisting motion clockwise.
• Plug the appliance into a wall outlet.
• Pulse on any switch, “Speed 1” (10) or “Speed II” (11) to operate
the chopper. During the processing, hold the motor unit with one
hand and the chopper bowl with the other.
• After use, unplug it and take the motor unit off of the chopper
cover (with a counter clockwise twisting motion); then remove
the chopper lid (also with a counter clockwise twisting motion) –
make sure beforehand that the blades are completely stopped -
•
Carefully remove the blade
– handle with caution because it is
sharp!
• Remove the processed food from the bowl.
Note: remember to use for no longer than 1 minute of continuous
motor use. The motor must then be rested for 10 minutes. Keep food
quantity to process under 1 lb. (450g).