Kalorik USK BL 2 Blender User Manual


 
6
USK BL 2 - 051107
Remove the jar from the base by turning it clockwise. Then
remove the lid and pour the liquid in the desired receptacle.
HOW TO CLEAN
Always unplug from outlet before cleaning.
For a quick rinsing of the pouring jar (for example between two
preparations), you can use clear water and switch on your
appliance for a few seconds. In this case, do not use any
detergent.
For a full cleaning of the pouring jar, remove it from the motor
block and turn the blades support by the jar bottom anti
clockwise to disassemble it (this will make the cleaning easier).
Then you can clean the all with soapy water and rinse thoroughly
with clear water. Dry before assembling. Therefore you only have
to screw the blades support by turning it clockwise in the bottom
of the pouring jar (tighten vigorously in order to avoid leaks).
Attention, do not lose the seal during this operation.
You can wipe the motor block with a soft damp cloth.