3 USK BL 24088 BL 25887 - 100603
15. The pouring jar should be assembled correctly on the motor base
before you plug it into the mains. Furthermore the pouring jar
should be locked so that the appliance can work.
16. The appliance is designed for the preparation of small quantities
of food, which have to be consumed rather quickly. It is not
designed for the preparation of large quantities at once.
17. Keep hands and utensils out of container while blending to
reduce the risk of severe personal injury and/or damage to
blender. A rubber spatula may be used but must be used only
when blender is not running and unplugged
18. Do not use a broken, chipped or cracked blender jar.
19. To reduce the risk of injury, never place the cutting unit blades on
base without jar properly attached. Blades are sharp, handle with
care.
20. Always operate the blender with cover in place.
21. Always close the jar with the lid before starting mixing. When
mixing hot liquid, do not fill more than 2/3 of the jar and be very
careful in order to avoid splashing of hot liquid, otherwise you can
get burned. Do not forget to close the feeding hole of the
pouring jar with the cap.
22. Screw on blade assembly firmly. Injury can result if moving blades
accidentally become exposed.
23. Do not leave blender unattended while it is operating.
24. To disconnect, let the ON/OFF switch in off position, then remove
the plug from wall outlet.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
Other important remarks:
• When not in use for a long time, store in a dry place, with
good ventilation
• Never open the lid while blending. Wait until the full stop of
the blades before adding food. Always unplug from the mains
before inserting the hand or any utensils in the jar.