Filter
Top Products
6
USK BL 7 - 071205
• Plug in the appliance.
• Choose the mixing speed with the button on the motor base. The
position 0 corresponds to the stopping of the appliance, the
position 1 to the slow speed and the position 2 to the fast one.
• The position "P" (Pulse) is particular because the button has to be
kept manually. This position is generally used to crush ice in order
to avoid damages on the blades, but it can also be used to
complete the mixing.
• It is also possible to add liquids or other ingredients anytime
without stopping the appliance. You only have to remove the
cap, which closes the feeding opening by turning and raising it
straight up.
• Once you have finished the preparation, stop the appliance
(position 0) and unplug the appliance.
• Remove the jar from the base. Then remove the lid and pour the
liquid in the desired receptacle.
HOW TO CLEAN
• Always unplug from outlet before cleaning.
• For a quick rinsing of the pouring jar (for example between two
preparations), you can use clear water and switch on your
appliance for a few seconds. In this case, do not use any
detergent.
• For a full cleaning of the pouring jar, remove it from the motor
block and unscrew the base of the blade assembly by turning it
anti-clockwise to disassemble it (this will make the cleaning
easier). Then you can clean the blades and the jar with soapy
water and rinse thoroughly with clear water. Dry before
assembling. Therefore you only have to screw the blades support
by turning it clockwise in the bottom of the pouring jar (tighten
vigorously in order to avoid leaks). Attention, do not lose the
sealing ring during this operation.
• You can wipe the motor block with a soft damp cloth.