Filter
Top Products
5
USK CM 4 - 070323
BEFORE FIRST USE
• When you use your appliance for the first time, pour fresh water
into the water tank (without coffee) and switch on the appliance.
• Once all the water has passed through, switch off the appliance
and let it cool down. When it is cold enough repeat the process 3
times with fresh water.
PREPARATION OF COFFEE
• Open the lid of the water tank.
• Pour the desired amount of water into the water tank. Make sure
not to overfill by respecting the maximum level indicated on the
water tank.
• Open the lid of the filter holder and insert a paper filter or
permanent filter (depending on the model) and add the desired
quantity of ground coffee. Close the lid of the filter holder.
• Never forget to close the lid of the water tank before switching
on your coffee maker.
• Switch on the coffee maker. The pilot light of the switch will be
illuminated, indicating that your appliance works. Thanks to the
keep warm function, your coffee is warmed up as long as the
appliance is switched on. Note that the appliance will be
switched on as long as you do not switch it off manually. We
advise you not to let the appliance switched on more than 2
hours and make sure that you never let an empty jug on the
appliance.
• When you remove the jug from the appliance, a non-drip valve
will automatically operate to stop any drops of coffee dripping
onto the hotplate. Replacement of the carafe automatically
opens the non-drip valve and allows remaining coffee to filter
trough into the jug.
• Once the water tank is empty, we advise you to wait until the
brewing process is finished and the filter has run empty before
removing the jug.
NOTE: You can also take the water tank out of the appliance by
pulling its handle. Make sure you put it back correctly before using
the coffee maker again.