Filter
Top Products
7
USK CMM1 - 070323
Assembly page 7/44
USE OF THE CITRUS PRESS
This accessory allows you to prepare fruit juices.
• Make sure the appliance is unplugged.
• Fit the base on the motor unit making sure the arrow on the motor
unit is in front of the
symbol located on the base. Then turn the
motor unit anticlockwise until the arrow ends up in front of the
.
If the base is not properly fitted, it will be impossible to switch on
the citrus press.
• Put the motor unit vertically on its base.
• Place the citrus press juice tray on top of the motor unit making
sure the arrow on the motor unit is in front of the
symbol
located on the accessory. Then turn the tray clockwise until the
arrow ends up in front of the
symbol.
• Place the cone on the shaft of the juice tray.
• Put a container below the spout of the tray to collect the juice.
• To disassemble the citrus press, proceed inversely.