Filter
Top Products
5
USK ICBM 1 - 070213
OPERATION
• After having unpacked the appliance, clean water tank and ice
basket thoroughly.
• Pour drinkable water in the water tank.
• To select the size of the ice cubes, press the SELECT button until
the pilot light corresponding to the desired size turns on. “S”: small,
“M”: medium, “L”: large.
• Press START button to start the ice making process.
• Press STOP button to switch off the appliance.
• If the water tank is getting empty, the “DEFICIENT” pilot light will
turn on and a beep will sound. In that case, press the STOP
button, fill in the water tank. Wait for 3 minutes before pressing the
START button to resume the ice making process.
• When the “ICE FULL” pilot light switches on, it means that you
should empty the ice basket and 5 beeps will sound. In that case,
press the STOP button, empty the ice basket and press the START
button to resume the ice making process.
NOTE:
If the ambient temperature is below 59°F, we advise you to
select the small size. If the ambient temperature is higher than
86°F, we recommend you select the large size.
For best performance, the temperature of the water you pour
into the water tank should be between 44.6°F and 95°F and
the ambient temperature between 59°F and 100.4°F.
If you select the large size, the ice making process will be a
little bit longer.
CLEANING AND CARE
• Always unplug the appliance before cleaning it.
• Wipe the appliance with kitchen paper or a soft cloth.
• Never immerse the appliance in water or any other liquid.
• Never put any part of the appliance in the dishwasher.
• Do not use abrasive products.
• When you know that you will not use the appliance for a long
period, remove the drain plug and let the water come out of the
water tank.