Kalorik USK JK 20744 Hot Beverage Maker User Manual


 
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity. Print only
what is inside the frame.
6 USK JK 20744 JK 32762 - 110127
Assembly page 6/24
Fax +32 2 359 95 50
CLEANING AND MAINTENANCE
Before attempting any cleaning operation, make sure the
appliance is unplugged from the supply socket and fully cooled
down.
To clean the exterior surfaces, simply wipe over with a soft damp
cloth and dry thoroughly.
Never use abrasive products
On no account must the jug kettle or its power base be immersed
in water.
FILTER
Your appliance is provided with a spout filter. When you want to
boil water, settle the filter first. The filter needs to be in place for
the kettle to work. Removing the filter will cause dysfunction in the
auto-shut off mechanism.
When the lid is open, you can remove the particle filter by taking
it out of the spout and clean it under running water. When putting
it back, make sure the arrow on the filter is upwards.
Filter should be rinsed clean regularly.
DESCALING
To remove scale from the jug kettle, use products made especially
available for this purpose. Make sure to use a type recommended
for plastic kettles or coffee makers.