Filter
Top Products
8
Cleaning your Slushie Maker
Ensure the Slushie Maker has been
unplugged from the power outlet.
Remove the bowl of shaved ice
from the base platform. Remove the
motor body by lifting it in an upward
position. Do not immerse in water.
Carefully remove the ice chamber by
lifting it in an upward position. Some
small ice pieces may remain in the ice
chamber; simply run the ice chamber
under warm water so that all excess
ice dissolves. If extra cleaning is
necessary, wash with warm soapy
water and dry thoroughly with a clean
cloth. Do not use harsh abrasives or
cleaners. Dry all parts thoroughly.
WARNING: Ice cubes
must not be used in the
ice chamber. Only use
the ice which is formed in
the freezer container.
NOTE: Do not place any
of the removable parts in
the dishwasher.
NOTE: Do not immerse the motor
base, cord or power plug in
water or any other liquid.
Care, Cleaning and Storage
Cleaning the Motor Body
The Motor body can be cleaned
with a soft, damp cloth (do not use
abrasive agents or cloths which can
damage the surface). Dry and polish
with a soft, lint-free cloth.
Storage
Before storing, thoroughly wash and
dry all removable parts.
Assemble the Slushie Maker and store
on the kitchen bench or in an easy to
access cupboard.
Store out of reach of children.
Store the appliance upright.
Do not store anything on top of
the appliance.