Filter
Top Products
7
FOOD PREPARATION GUIDE
FOOD ACCESSORY APPROX METHOD APPROX
AMOUNT MIXING TIME
Dressings Blending shaft 250ml Oil & Vinegar 30 seconds
flavouring
1 seasoning
Smoothies Blending shaft 250ml 100g fruit 40 seconds
150ml milk
Pureed Blending shaft 250g Soften, vegetable 30 seconds
vegetables or fruit
2 tablespoons
milk/juice
Breadcrumbs Chopper bowl Half full Roughly chopped, Approx
dried or fresh 1 minute
bread and crusts,
chop to desired
consistency
Cheese Chopper bowl 100g Harder cheese will 30 seconds
Small dice cut and chop
more evenly
Hard boiled Chopper bowl 2 eggs Remove shell, 15 seconds
eggs (120g) slice in half, season
if required, chop to
desired consistency
Nuts Chopper bowl
1
⁄2 cup Place chosen nuts 30 seconds
(125g) into bowl, pulse to
desired fineness or
coarseness
Garlic Chopper bowl 100g Peeled cloves 20 seconds
1 tablespoon olive
oil, process desired
texture
Ginger Chopper bowl 125g Peeled and chopped 40 seconds
2 tablespoons
dry sherry
Meat Chopper bowl 150g Dice meat to a 2cm 15 seconds
dice before chopping
6
USING THE CHOPPER
BOWL
Plug into a 230/240V power outlet and
switch on at the power outlet.
Depress the desired speed control switch
on the motor unit to commence
processing.The Stick Mix motor will only
operate while the speed control switch
remains depressed – this is a safety
feature.
When you have finished processing the
food, switch off at the power outlet and
remove plug.
Before removing processed food from the
chopper bowl, remove the blade.
RECOMMENDATIONS FOR
THE CHOPPER BOWL
Do not operate your Stick Mix chopper
when the bowl is empty.
When processing, cut food into uniform
sizes, this will ensure quicker, consistent
results.
For effective processing depress the speed
control switch a few times in succession,
using a ‘pulse’ action.
During processing hold the motor body
with one hand and the chopper
attachment with the other.
Hard food stuffs such as coffee beans, ice
cubes, cereals, large whole spices and
chocolate in lumps should not be
processed with this appliance, as these
may damage the blades.
CARE AND CLEANING
Your Stick Mix stainless steel processing
shaft, mixing container and chopper
attachment should be rinsed thoroughly
after use.
Quick wash – To quickly wash between
processing, hold the Stick Mix in a jug of
water and turn on for 5 seconds.This will
remove food and allow you to continue
onto the next processing task.
To clean thoroughly after each use, switch
off from the power outlet and then unplug.
Disassemble the unit and wash the shaft in
warm soapy water. Dry all parts thoroughly
after washing and rinsing them.
NOTE:When refitting the shaft ensure that it is dry
and no water is left inside.
THE CHOPPER
Wash the container and cutting blade in
warm soapy water.
Do not put any part of the Stick Mix in
the dishwasher.
WARNING! DO NOT IMMERSE
THE MOTOR UNIT, CORD OR
PLUG IN WATER OR ANY OTHER
LIQUID.
Wipe down the motor unit with a damp
cloth only. Do not use abrasives, harsh
cleaning solutions or hard brushes for
cleaning as these may scratch and damage
the unit.
WARNING! THE SHAFT
BLADE IS VERY SHARP, USE
EXTREME CARE WHEN
WASHING.
The mixing jug supplied is not suitable for
a microwave oven.