Kenko MVH-2D Mixer User Manual


 
Specialty
1. PAN-TILT HEAD is set on the tripod and use for Video camera with wired remote
control.
2. Pan (vertical) and Tilt (horizontal) is possible to control and also possible pan and
Tilt same time.
Possible to adjust speed variable.
Notice for use
1. Must be fastened to mounting surface.
2. Keep dry.
3. Body must be level. When not level function is not maximized.
4. Put in plastic bag when boxed in foam polystyrene.
5. Don’t drop and give shock.
6. Don’t dismantle.
7. After use Power switch (13) off.
MVH-2D REMOTE CONTROLER CONECTION
Battery
Battery lifetime
1. Normal AA battery good for 2hours to operate.
2. After use turn off power switch (13) or remove to remote controller.
Power drain will occur if unit is not switched off.
Attention for battery
1. + - Must be carefully install.
2. Do not mix old and new battery.
3. Do not mix different type of battery.
Wall Installation
Screw size for this equipment use for ¼ - 20UNC.
When install ting to be careful check area to include camera space.
Option WH-1, WH-2, WH-4,
Attention!
When using upside-down maximum load is 3kg.