Filter
Top Products
Removethetop rackwhenyouneedmorespaceto
loadtallitemsinthebottomrack.
To remove the top rack:
t, Remove all toaded items from top rack.
2_ Gently pull out and up on left end cap tab..
3o Slide end cap up and off of guide rail.
4. Repeat Steps 1 and 2 to remove right
end cap.
5. Hold top rack with both hands and pull rack
forward until guide wheels are out of guide rail..
Guide rail
End cap tab
To replace the top rack:
1. Position top rack with the rear guide wheels next
to guide rails°
2. Slide guide wheels of rack into the guide rails.
Push top rack into dishwasher,
30 Slide end caps into the holes in guide rails. You
will hear the end cap "snap" into place,
:I
i,li
i! ¸,
!:!
I:L
Items with cooked=on or dried-on food should be
loaded in the bottom rack, with soiled surfaces
facing inward to the spray.
NOTE: The top rack can be removed if more space
is needed for tall items in the bottom rack. See
"Removing the top rack.."
o Do not load glasses, cups, or plastic items in the
bottom rack..
a Load plates, soup bowls, etc., between prongs
and facing inward to the spray.
o Overlap edges of plates for large loads°
Secure heavily soiled cookware face down in
the rack.
Spray tower
continued on next page
t5