Kenmore 22-48834 Oven User Manual


 
page 2 of 2
Effective 11/09/09
12109
Because of our continuous program of product improvement, Sears
reserves the right to change materials and specications without
notice. Consult installation instructions packed with the product for
nal dimensional data. For complete warranty information, contact
your local Sears Commercial Account Manager.
22-4885X.PDF
combination oven | 22-48852/3/4/9
Because of our continuous program of product improvement, Sears
reserves the right to change materials and specications without
notice. Consult installation instructions packed with the product for
nal dimensional data. For complete warranty information, contact
your local Sears Commercial Account Manager.
28
1
/4"
42
3
/4"
Spacer
40
3
/4"
24
1
/2"
21"
30
"
41
1
/8" -
41
1
/4"
30
1
/8"
28
1
/2"-
29"
23
1
/2"
1" min.
3"
max.
1
1
/4"
min.
Electrical Junction Box
(Right or Left Side
Depending on Model)
2" Wide Wood
Spacer if Needed
Hole for Cable
(Right or Left
Side Depending
on Model)
11
1
/2"
Suggested,
4
1
/2" min.
NOTES:
1. Base must be capable of supporting 225 pounds.
2. Cutout depth is critical to the proper installation of the built-in oven. If the oven decorative trim does not butt
against the cabinet, or if noise is heard on convection models, verify the dimension to assure it is the
required depth.
3. For a cutout height greater than 41
11
/16", add one 2" wide wood shim of appropriate height to each side of
the opening under the appliance rails.