_=_ i._| _= __
eH-L,, ean,ng(upperovenon y)
What to Expect during Cleaning:
While the oven is in operation, the oven heats to temperatures much higher than
those used in normal cooking. Sounds of metal expansion and contraction are
normal. Odor is also normal as the food soil is being removed. Smoke may appear
through the oven vent.
If heavy spi[[overs are not wiped up before cleaning, they may flame and cause
more smoke and odor than usual. This is normal and safe and should not cause
alarm. If available, use an exhaust fan during the self-cleaning cycle.
Self-Clean Cycle time length
For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour
cycle for average or a 4 hour cycle for heavy soils. NOTE: The kitchen area
should be well ventilated using an open window, ventilation fan or exhaust hood
during the Self-Clean cycle. This will help eliminate the normal odors associated
with the Self-Clean cycle.
To Set the Controls for a Self=Clean Cycle or a Delayed Start
Self-Clean Cycle:
(Note: [f you do not want to start a Delayed Self-Clean Cycle, skips steps 2 & 3.)
1. Be sure the clock shows the correct time of day.
2. Press _e_. "DELAY" will flash.
v
3. Press and hold thej%,pad to scroll to the time to start the delayed Self-Clean
cycle. Release the pad when the desired time is displayed.
Press _I_. " " appears in the
4.
display.
v
5. Press theAor Vonce. "3:00" appears in the display for a 3 hour cycle. To
change to a 2 hour cycle press v. "2:00" appears in the display or to select
a 4 hour cycle press A. "4:00" appears in the display.
As soon as the controls are set, the motor driven lock will begin to close
automatically and the "LOCKED" indicator light will appear. DO NOT open the
oven door while the light is flashing (it takes about 15 seconds for the oven
door to lock).
6. "CLn" will appear in the display during the Self-Clean cycle and the
"DOOR LOCKED" light will glow until the Self-Cleaning cycle is complete or
cancelled and the oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1. The time of day or "End" will appear in the display window and the "Clean" and
"DOOR LOCKED" light will continue to glow.
2. Once the oven has cooled down for about 1 HOUR and the "DOOR LOCKED"
light has gone out, the oven door can be opened.
NOTE: When the oven iscool, wipe away any residue or powdered ash with a damp
cloth or paper towel.
Stopping or Interrupting a Self=Cleaning Cycle
[f it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1. Press _o
2. Once the oven has cooled down for about 1 HOUR and the "DOOR LOCK" light
has gone out, the oven door can be opened.
3. Restart the Self-Clean cycle once all conditions have been corrected.
To avoid possible
burns
use care when opening
the oven door after the Self-
s_
Cleaning cycle. Stand to the side _,_
of the oven when opening the
door to allow hot air or steam to ,_....
escape.
DO NOT force the
oven door open. This can
damage the automatic door
locking system. Use caution and
avoid possible burns when
opening the door after the Self-
Cleaning cycle has completed.
The oven may still be VERY
HOT.
17