Filter
Top Products
Freezer Features
Automatic Ice Maker
• Confirm ice bucket is in place and ice maker arm is
down
Off
position
maker
arm
• After freezer section reaches normal temperature, ice
maker' fills with water and begins operating. Allow
24-48 hours after installation before first harvest of
ice. Ice maker produces 7-9 harvests of ice in a
24-hour period under ideal conditions.
= After ice is formed, ice maker drops ice cubes into
ice storage bucket_ During ice production, ice maker
arm raises and Iowers_ When ice storage bucket is full,
ice maker arm turns ice maker off_
Note: Discard first 3 harvests of ice after initially
connecting refrigerator to household water supply and
after extended periods of nonuse,, This will prevent the
consumption of any impurities left in the line or use of
off-taste ice.
• ff you wish to stop ice production raise ice maker arm.
A definite click is heard when proper position is
reached. Ice maker arm will remain in off position until
pushed down..
l CAUTION ]1
To avoid damage to ice maker, observe the following: ]
Do not force ice maker arm down or up. ]
Do not place or store anything in ice storage bucket. I
J
Food Organizer Storage
Wire baskets slide out for easy access of items in back°
Wire baskets and wire shelves (some models) can be
rearraged to meet individual storage needs.
• Remove shelves and baskets by lifting front of shelf
and pulling out.
• Replace shelves and baskets by placing shelves and
baskets on side rails_Slide shelves and baskets right
and back until round knob is behind stop on rail.
• Remove shelf by lifting right side of shelf out of clips
and pulling out of left side mounting holes,. Reverse
procedure to reinstall shelf,
Wire I
12