Filter
Top Products
REPLACING THE CARBON FILTER
CARTRIDGE (cont.)
To replace the cartridge, follow
steps I - 6 on page 3. Be sure to clean
the inside of the sump. Cleaners are
available from Sears (see the parts
list on page 7), or use hot, soapy wa-
ter. After replacing the cartridge,
flush the cartridge for 2 - 3 minutes
to remove harmless carbon fines (see
note on page 5).
SERVICE CHECK LIST
Filtered water has bad - The carbon cartridge needs replacing.
taste and/or odor.
Fine, black particles in - This is harmless carbon "fines" from a new
filtered water, cartridge. Discard the first few cupfuls of fil-
tered water after changing the cartridge.
No water flow from the - Cold water faucet and/or diverter valve not
_ter. opened.
- Supply tubing, from diverter valve to filter,
pinched or plugged.
- The carbon cartridge needs replacing.
6