Kenmore 625.38454 Water Dispenser User Manual


 
Planning Your installation ............................................................................... 3
Tools and Materials Needed .............................................................................. 3
Typical Undersink installation ............................................................................ 4
installation Steps ...................................................................................... 5-7
Step 1 - install Cold Water Supply Fitting ............................................................. 5
Step 2 - Make Hole for Filtered Water Faucet .......................................................... 6
Step 3 - Assemble and install Filtered Water Faucet .................................................... 6
Step 4 - Make Tubing Connections ................................................................... 7
Filter Cartridge installation / Replacement ................................................................. 8
Using the System ....................................................................................... 9
Filter Cartridge Life ..................................................................................... 9
Exploded View & Parts List .......................................................................... 10-11
When planning your installation, use the drawings on pages 4 & 5 to guide you. There are many things to consider
as you plan:
V The water filter housing inlet and outlet connections
are 1/4" Quick Connect (push-to-connect)
Y Existing plumbing type (copper, threaded, etc.) and
nominal size (1/4", 3/8", etc.)
Y Tools required (see below)
V Your plumbing skills
Y Cost of materials needed
Y Space available for installing the filter housing
Y The possibility of water spilling from sump when
replacing filter cartridges
Make a simple sketch of your proposed installation, and a list of plumbing materials you will need. Obtain every-
thing you need before starting the installation. Be sure you have the tools required.
Y Plumbers' Putty
Y Slotted and Phillips Screwdrivers
Y Pliers and Adjustable Jaw Wrench
Y Tubing Cutter
Y Sandpaper or Emery Cloth
Y Electric Drill & 3/4" Drill Bit, if mounting hole is
needed for the faucet
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com