Filter
Top Products
Reversing Door Swing (continued)
Transferring the center hinge bracket
Do not remove
this screw
Center right
(a} Remove the hinge bracket from the center right side of
the cabinet by removing the three outermost Torx screws_
(b) Remove the three outermost Torx screws from the
center left side of the cabinet and screw them into the
holes at the right side uncovered in Step (a) above
1
/ Do notremove
_rew
Center left
(c) Place the center hinge bracket over the holes at
the center left side of the cabinet, insert the screws
you removed from the opposite side, and tighten them.
Transferring the top hinge
Interchange hinge and screws at top right with
screws at top left of the cabinet. Do not tighten
the screws on the hinge side at this time
Transferring door handles
Freezer door
Plug button ._ 4w
L._.D., - _0"
(a) Remove screw holding handle to top of door.
(b) Remove three screws ho}ding handle to bottom
of door_
(c) Transfer screw from handle hole in top right of
door to opposite side,
(d) Transfer plug button in top left of door to
opposite side_
{e) in reverse order, reassemble handle to right side
of door using screws removed in Steps (a) and (b)
Fresh food door
I
Long Handle
i
I
I
Short Handle
(a) Transfer two screws in bottom left of door to
opposite side. (Wait until handle is moved before
reinstalling front screw )
14