Filter
Top Products
3. Press POWER
@
POWER
Press POWER button to turn on the dryer.
4. Select desired cycle
EVENHEAT AUTO DRY
Normal
TiME CYCLES
Select the desired cycle for your load. See "Cycle Guide" or
"Control Panel and Features".
5. Set cycle settings
High
Med High
Medium
Low
Air Only
150 Min
60 Min
Off
TIME CYCLES ONLY AUTO CYCLES ONLY
Dry Temp (for use with Time Cycles only)
Press the Dry Temp button to change the drying temperature from
the default setting.
Dry Level (for use with Auto Cycles only)
Normal Dry Level is a good starting point for optimal energy
savings.
You can select a different Dry Level, depending on your load, by
pressing the button for More, Normal, or Less. Selecting More,
Normal, or Less automatically adjusts the Dry Level at which the
dryer will shut off. Once a Dry Level is set, it cannot be changed
without stopping the cycle.
Auto Dry cycles give the best drying in the shortest time. Drying
time varies based on fabric type, load size, and dryness setting.
NOTE: More Dry removes more load moisture. Normal Dry is used
for a starting point for Auto drying. Less Dry removes Jess moisture
and is used for loads you may want to put on a hanger
to complete drying.
WrinkJe GuardTM feature
[] Get up to 60 or 150 minutes for models with two choices (90
minutes for models with only one choice) of heat-free, periodic
tumbling at the end of a cycle. Press the WRINKLE GUARD TM
button to turn On or Off: at any time before the cycle has
ended.
[] The WRINKLE GUARD TM feature is preset to "Off:". Jf selected
for other cycles, the WRINKLE GUARD TM feature setting will
remain "On" the next time that cycle is selected.
6. Select cycle options (if desired)
--TIME CYCLES --
AUTO CYCLES ONLY OFF/LOW/HIGH
Press appropriate button for selected options, Jf desired. For
Time Cycles, press More Time Jf you want to increase the cycle
length, or press Less Time Jf you want to decrease the cycle
length. Less Time and More Time options are available with
Time Cycles only.
NOTE: Not all options and settings are available with all cycles.
The default cycle settings will illuminate based on the cycle
selected. See "Cycle Guide". For some cycles, you may select
alternate settings by pressing the button for that setting.
NOTE: Not all options and settings are available with all cycles.
8