Filter
Top Products
Oven Control Functions
READ TH EiNSTRUCTiONS CAREFU LLY BEFORE USING TH EOVEN. For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.
CLOCK SET COOK TIME FEATURE
PAD Used PAD Used to INDICATOR
to set the enter the length of LIGHTS These
time of day.., the baking time. light to show
_. which feature is
OVEN INTERIOR _ --_ln
use.
LIGHT PAD Used to
[urn oven ntenor ight _\ -,.
ON or OFF. This _ad is "_-
also used to acnvate _ _ o
the Cooktou Lockout "_'_--_ "
feature some mouelsL
SELECT SELF-CLEAN ® o
PAD Used to select
me Self-Cleaning
cycle. A 2. 3 or 4 hour _-
Self-Clean t_me may be /
J
selected. /
/ /
J
TIMER SET/OFF DELAY START
PAD Used to set or PAD Used to
cancel the minute set the desired
timer. The minute timer start time for
does not start or stop baking & Self-
cooking. Also, Clean. May be
TIMERSET/OFFpad used with COOK
is used to set the TIME to program
Continuous Bake a delayed bake
feature, cycle.
UP and DOWN ARROW PADS--
Used along with the function pads to
select oven temperature, cook time,
start time (when programming an
automatic start time), time of day,
clean time and minute timer.
o
o
o
o
ADD 1 MINUTE -- BAKEPAD--
Use to select Add 1 Used to select
Minute feature, the bake
function.
BROIL PAD-- Used to
select the variable broil
function.
SLOW COOK PAD--
set the Slow Cook
feature.
WARM & HOLD PAD--
Used to set the Warm &
Hold feature.
RECIPE RECALL PAD--
Used to set the Recipe
Recall feature.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* --The "OVEN" STOP/CLEAR PAD--
light will glow each time the oven turns on to maintain the set Used to clear any
oven temperature. The "PREHEAT" light will glow when the function previously
oven is first set to operate, or if the desired temperature is reset entered except the time
higher than the actual oven temperature. The "DOOR LOCKED" of day and minute timer.
light will flash when the oven door locks and unlocks or when Press STOP/CLEAR to
using the Self-Clean cycle or the oven door lockout is activated, stop cooking. Also the
The indicator light will glow constantly after the door STOP/CLEAR pad is
Iocks.COOKTOP LOCKED light will glow when the cooktop has used to activate oven
been locked (some models), door lockout setting.
*Note: The OVEN indi¢ator light On {he electronic display Will V once to change back to normal sound mode (:SP will
turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling appear in the display). The control will now provide normal
to maintain the selected baking tempe[ature. Whe n the audible beeps whenever a pad is pressed.
preheat indicator light turns OFF, your oven is ready. Temperature conversion
For a silent control panel
When choosing a function, a beep will sound each time a pad
is pressed. If desired, the control can be programmed for silent
operation. To switch back and forth between normal sound or
silent operation:
Press & hold _. After 7 seconds, the control will beep once.
:SP should appear in the display indicating that the control is in
The electronic oven control is set to operate in °F (Fahrenheit)
when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F
(control should not be in a Bake or Clean mode):
1. Press B,o_ .... appears in the display.
normal sound mode. Press either A or V once to change 2. Press and hold the A until "HI" appears in the display.
to silent mode (:- - will appear in the display). The silent mode
will block the controls from sounding when a pad is pressed. 3.
To return to normal sound operation, press & hold _. After 7 4.
5.
seconds :- - will appear in the display. Press either _ or
Press and hold B,o_ until °F or °C appears in the display.
Press the _ or V to change °F to °C or °C to °F.
Press any control pad to return to normal operating mode.
....iiii.......
Setting Oven Controls
Note: The time of day must first be set in order to operate the oven.
To Set the Clock
When the range is first plugged in, or when the power supply to
the range has been interrupted, the display will flash "12:00".
(/Q') once (do not hold pad down).1. Press
2, Within 5 seconds, press and hold the _ or V until the
correct time of day appears in the display.
Note: The clock cannot be changed during any timed bake
or Self-Clean cycle.