Filter
Top Products
Oven Control Functions
READ THE iNSTRUCTiONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with
the various functions of the oven as described below.
..... UP and DOWN ARROW
BAKE PAD--Used
to select the bake •
function. _-"_,
SELECT BROIL
PAD-- Used to
select the variable
broil feature.
TIMER ON/OFF PAD-- Used to set or
cancel the minute timer. The minute
timer does not start or stop cooking.
Setting Oven Controls
PADS-- Used along with
the function to select
pads
oven temperature, time of
J% day, clean time and minute
timer.
CLOCK SET PAD--
Used to set the time
of day.
\
STOP/CLEAR -- Used to clear any
function previously entered except
the time of day and minute timer.
Press STOP/CLEAR to stop
cooking.
Note: The time of day must first be set in order to operate the oven, :
To Set the Clock
When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash
"12:00".
1. Press _.
2. Within 5 seconds, press and hold the /_ or v until the correct time of day appears in the display.
To Set the Minute Timer:
t. Press @.
2. Pressthe /_ to increase the time in one minute increments. Press and hold the /-, to increase the time in t0
minute increments. The timer can be set for any amount of time from t minute to t t hours and 59 minutes.
Note: If you press the v first, the timer will advance to t t hours and 59 minutes.
3. The display shows the timer count down in minutes until one minute remains. Then the display will count down in
seconds.
When the set time has run out, the timer will sound a 3 second beep. 0:00 will appear in the display until _ is
4.
pressed.
Note: While the minute timer is counting down, the ":" will flash. The minute timer does not start or stop cooking. It serves
as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or during
any of the other oven functions. When the minute timer is in use with any other function, the minute timer will be shown in
the display. To view other functions, press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press and hold the /_ or v to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out: Press @.