Filter
Top Products
Oven Control Functions
READ THE INSTRU CTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use ofyour oven, become familiar with
the various pad functions of the oven as described below.
COOK TIME
PAD-- Used to
enter the length of
CLOCK SET the baking time.
PAD-- Used
to set the
time of day..
TIMERSET/OFF t__ ®
PAD-- Used to set
or cancel the minute ,/
timer. The minute
timer does not start
or stop cooking.
Also,
TIMER SET/OFF pad
is used to set the
Continuous Bake
feature.
DELAY START PAD-- Used
to set the desired start time
for baking & Self-Clean. May
be used with COOK TIME to
program a delayed bake
cycle.
UP and DOWN ARROW PADS-- Used along
with the function pads to select oven
temperature, cook time, start time (when
programming an automatic start time), time of
day, clean time and minute timer.
®
[_e • F_e _* t
BAKE PAD--Used
to select the bake
function.
FEATURE INDICATOR
LIGHTS-- These light to
show which feature is in
20,LPAD--Usodto
select the variable broil
_:_ function.
® SELECT SELF-CLEAN
PAD-- Used to select the
_: _>_:-- Self-Cleaning cycle. A 2,
3 or 4 hour Self-Clean
time may be selected.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated. The indicator light
will glow constantly after the door locks.
STOP/CLEAR PAD--
Used to clear any
function previously
entered except the time
of day and minute timer.
Press STOP/CLEAR to
stop cooking. Also the
STOP/CLEAR pad is
used to activate oven
door lockout setting.
*Note: The OVEN indicator' light on th e electronic display will turn ON and OFF when using the Bake feature and during
prehea L This is normal and indicates that the oven is CYclingto maintain the selected baking temperature, When the
preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold @. After 7 seconds, the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press and hold @ again for 7 seconds until the control beeps
once.
Note: The control will return to the audible mode after a power outage.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed
for any temperature from 17O°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press ,,._ .... appears in the display.
2. Press and hold the _ until "HI" appears in the display.
3. Press and hold _,°, until °F or appears in the display.
4. Press the J%, or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating mode.
12