Filter
Top Products
Setting Oven Controls
To Set the Clock
When the range is first plugged in, or when the power
supply to the range has been interrupted, the display will
flash "12:00".
(_ once (do not hold pad down).
1. Press
.
Within 5 seconds, press and hold the A or V until
the correct time of day appears in the display.
Note: The clock cannot be changed during any timed
bake or Self-Clean cycle.
To Set the Minute Timer:
1. Press @.
2. Press the A to increase the time in one minute
increments. Press and hold the J% to increase the
time in 10 minute increments. The timer can be set for
any amount of time from 1 minute to 11 hours & 59
minutes.
Note: If the V pad is pressed first, the timer will
advance to 11 hours & 59 minutes.
3. The display shows the timer countdown in minutes until
1 minute remains. Then the display will countdown in
seconds.
4. When the set time has run out, the timer will beep 3
times and will continue to beep 3 times every 60
seconds until @ is pressed.
Note: The indicator light located above the @ pad will glow
while the minute timer is active.
Note: The minute timer does not start or stop cooking. It
serves as an extra timer in the kitchen that will beep when
the set time has run out. The minute timer can be used
alone or during any of the other oven functions. When the
minute timer is in use with any other function, the minute
timer will be shown in the display. To view other functions,
press the pad for that function.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, press
and hold the A or V to increase or decrease the time.
To Cancel the Minute Timer before the set time
run out: Press _.
has
Note: The time of daY must firSt be set in ordeit0 operate
theoven.
Note: To turn the time of day display OFF or ON in the
(9 and hold for 15 seconds (the control wilJ
display
press
beep once) and then release. This feature does not remove
the set time ofday from the memory ofthe control. When the
display isturned OFF the time of day wJIre-appear for afew
seconds any time the (('_)'] pad is touched.
To Set or Change the Temperature for Baking
The oven can be programmed to bake at any temperature
from 170°F to 550°F (77°C to 287°C).
To Set the Controls for Baking:
1. Press Bake." "appears in the display.
_J
2. Within 5 seconds, press the /_ or V. The display
will show "350°F (177°C)." By pressing and holding
the J% or V, the temperature can then be adjusted
in 5°F increments (1°C if the control is set to display
Celsius).
3. As soon as the A or V pad is released, the oven
will begin heating to the selected temperature. When
the displayed temperature reaches the desired baking
temperature, the preheat indicator light will turn OFF
and the control will beep 3 times.
4. To cancel baking, press _.
To Change the Oven Temperature after Baking has
Started:
1. Press Bakeand make sure the bake temperature is
_J
displayed.
2. Press the _ or V pad to increase or decrease the
set temperature.
To Set Control for Continuous Bake or 12
Hour Energy Saving
The oven control has a built-in 12 Hour Energy Saving
feature that will shut off the oven ifthe control is left on for
more than 11 hours and 59 minutes. The oven can be
programmed to override this feature for continuous baking.
To set control for continuous baking:
1. Press and hold @ down for 5 seconds until tone is
heard, "---- hr" will appear in display for continuous
cooking. The current time of day will return to the
display.
2. To cancel the Continuous Bake function, press
and hold for 5 seconds until tone is heard. "12hr" will
appear in display indicating that the control has
returned to the 12 Hour Energy Saving feature.
13