Filter
Top Products
SETTING THE CONTROLS
Temperature
• Your refrigerator has a control pad on the dispenser that
lets you regulate the temperature in the freezer and
refrigerator compartments.
• Initially set the refrigerator control at 37°F (3°C) and the
freezer control at 0°F (-18°C). Leave it at this setting for
24 hours (one day) to stabilize. Then adjust the
compartment temperature as desired.
Filter
• Filter Reset : When the FILTER RESET icon turns on,
you have to change the water filter. Press the FILTER
RESET button for 3 seconds to turn the icon off.
You need to change the water filter approximately every
6 months.
Light
• The dispenser lighter is Ugoht(OFF) after applying the
power, and when you press this button, the dispenser
light is u_ht(ON).
• Refrigerator Temp Control: 33°F to 46°F (0°C to 8°C)
The lower the number setting, the colder the refrigerator
compartment will become.
• Freezer Temp Control: -6°F to 8°F (-21 °C to -13°C)
When the setting is at a lower number, the freezer
compartment becomes colder. The refrigerator
compartment becomes warmer because less cold air
flows into the refrigerator.
Ultra Ice
• When you press the "Ultra Ice" button, the graphic
[ 0 ] will light up in the display and it continues for
24 hours. It will automatically shut off after 24 hours
have passed.
Or you can stop this function manually by pressing the
button one more time.
• This function increases both icemaking and freezing
capabilities.
Dispenser
• You can select water, crushed ice, or cubed
ice by pressing @ button as you desire.
• There could be some dripping after
dispensing. It is recommended to hold your
cup for a couple of seconds after dispensing.
A WARNING: If a door is open, the dispenser will not
work.
Alarm
• When the power is connected to the refrigerator, door
alarm is initially set ON and door alarm display will show
A,._,_(ON).
• When either refrigerator or the freezer door is left open
for more than 60 seconds, the alarm will ding to let you
know the door is open.
• When you close the door, the door alarm will stop
dinging.
• If you want to disable the door alarm function, press _
button then the door alarm display will switched to A,O,mo
(OFF).
Lock
• The Lock funtion disables all the display buttons (except
the Lock button) and the dispenser operation.
• When the power is initially connected to the refrigerator,
Lock function is off.
• To activate the Lock function: press and hold ,_- button
for 3 seconds or more. Lo_k(ON) sign will be displayed
and the Lock function is now enabled.
• No buttons other than _ button will work including
dispenser button while Lock function is enabled.
• To disable the Lock function, press and hold _ button
for 3 seconds or more.
Temperature Mode Switch Function(°F <->°C)
• If you want to convert °F to °C or vice versa, press and
hold the _ Freezer and @ the Refrigerator
temperture buttons simultaneously for 5 seconds or
more.
ENSURING PROPER AIR CIRCULATION
Do not block air channels with any objects or food for air
circulation to prevent food loss due to the lack of cooling air.
16