Filter
Top Products
12
HOW TO REPLACE FREEZER DOOR HANDLE
NOTE: Handle appearance may vary from illustrations on
this page.
Replacing Freezer Drawer Handle
footprints over the mounting fasteners and tightening
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
REFRIGERATOR INSTALLATION
HOW TO REMOVE FREEZER DOOR HANDLE
NOTE: Handle appearance may vary from illustrations on
this page.
Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of
handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
NOTE: Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
WARNING
When taking apart or assembling the refrigerator or
freezer handle:
Grasp the handle tightly to avoid dropping it.
Dropping the handle could cause personal injury or
Do not swing the handle towards people or animals
after taking apart the handle.
Insert the bracket hole of the handle into the stopper
bolt of the door exactly, and then assemble the set
Check if there’s any gap between the door and