Kenmore kenmore elite microwave hood combination Microwave Oven User Manual


 
3. Replace bulb with candelabra-base 30-watt bulb
(Part No. 5304488360) available from Sears by
calling 1-800-4-MY-HOME.
4.
The oven cavity light
1. Unplug microwave oven or disconnect power.
3. Slide the vent left and tip forward, then lift out to
remove.
Plug in microwave oven or reconnect power.
2. Open the microwave door and remove the two
vent mounting screws located on top of the microwave
using a ## 1#Phillips screwdriver.
#
4./LIWWKHERWWRPRIWKHFKDUFRDOoOWHr6OLGHWKHoOWHU
straight out.
5.
Replace the bulb with a candelabra-base
30-watt bulb (Part No. 5 304488360)
from Sears by calling 1-800-4-MY-HOME.
6.
Close the microwave door. Plug in microwave oven 1 0 .
Replace the bulb holder.
7.
L ift up the bulb holder.
or reconnect power.
REPLACING THE COOKTOP AND
The cooktop lights
1. Unplug microwave oven or disconnect power.
2. Remove the bulb cover mounting screw for the
OVEN CAVITY LIGHTS
Mounting screw
specific bulb you want to replace.
should rest like the picture shown below.
8. Slide the charcoal filter into p ace. The filterl
vent into place. Push the vent top into position
mounting
1#
#
Phillips screwdriver.#
and slide right into place. Replace the two vent
screws located on top of the microwave #
using a #
9. Reinstall the vent by sliding the bottom of the
EN-38