Kenwood CM040 Coffeemaker User Manual


 
T
his appliance conforms to EC
directive 2004/108/EC on
E
lectromagnetic Compatibility and
E
C regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
1 Wash the parts: see ‘care and
cleaning’.
2 Run two full tanks of water (without
coffee) through the coffee maker to
clean it out. See ‘to make coffee’.
key
water tank lid
cup warming tray/filter holder lid
filter holder lid handle
paper filters
permanent filter
filter holder
anti-drip valve
mesh filter
water tank
descale warning button
on/off button with indicator
hotplate
measuring spoon
carafe
to make coffee
1 Lift up the water tank lid .
2 Fill the tank with the desired amount
of water. The water level must be
between the 2 and 10 cup marks.
Do not fill above the MAX level.
Use cold water. We recommend
using filtered water as it reduces
limescale and prolongs the life of
your coffee maker. Never use warm
or fizzy water.
3 Lift the filter holder lid using the
handle at the front of the coffee
maker. Ensure the filter holder is
positioned correctly.
4
Fit either the permanent filter
supplied or a paper filter into the
f
ilter holder. Add the coffee using
t
he spoon supplied. (Note: The
strength of your brewed coffee will
depend on the variety and strength
of coffee used not the amount. For
best brewing 1 level spoon (7g) of
coffee is recommended per cup).
5 Close the lid and put the carafe on
the hotplate. NOTE: The lid
must be fitted to the carafe
and closed in order to
operate the anti-drip valve.
6 Plug in and switch on.
7 Don’t remove the carafe until
brewing has finished.
When the carafe is empty, switch off
and unplug the appliance.
The hot plate will keep your coffee
hot, but the sooner you drink it, the
better it will taste.
Your coffee maker will keep the
coffee warm and then automatically
switch off after 2 hours.
If you have not used the appliance
for a while, run one full tank of
water (without coffee) through to
clean it out.
care & cleaning
Always switch off, unplug and allow
to cool before cleaning.
Don’t wash parts in the dishwasher.
carafe and lid, filter holder
and permanent filter holder
Wash, then dry.
body
Wipe with a damp cloth, then dry.
Don’t use abrasives - they’ll scratch
the plastic and metal surfaces.
mesh filter
The mesh filter in the tank can be
lifted out for cleaning if required.
Always ensure it is replaced before
filling the tank with water.
4