Kenwood CM900 Coffeemaker User Manual


 
NOTE: The lid must be fitted
to the carafe in order to
operate the anti-drip valve.
5 Plug in and switch on – the neon
light will come on.
6 Don’t remove the carafe until
brewing has finished.
The separate element for the
hotplate ensure that the coffee is
maintained at the correct
temperature after brewing.
The hotplate will keep your coffee
hot, but the sooner you drink it, the
better it will taste.
Your coffee maker will keep the
coffee warm and then automatically
switch off after 2 hours.
If you haven’t used the machine for
a while, run one lot of water through
it (without coffee) to clean it out. Fill
the water tank to the top cup mark
when you do this.
care & cleaning
Always switch off, unplug and allow
to cool before cleaning.
Never put the machine in water or let
the cord or plug get wet.
Don’t wash parts in the dishwasher.
Wipe with a damp cloth, then dry.
Don’t use abrasives - they’ll scratch
the plastic and metal surfaces.
removable parts
Wash in hot soapy water, then dry.
descaling
After 90 brewing cycles the de-scale
warning light will come on and flash
to indicate that the coffee maker
requires descaling (see ‘to descale’)
to descale
1 Buy a suitable descaler.
2 Descale the machine following the
descaler manufacturer’s instructions.
3 After descaling, run several lots of
water through the machine to clean
it out. Fill the tank to the top cup
mark when you do this.
4 Wash the parts.
5 Plug in and switch on.
6 Reset the de-scale warning light by
pressing the button at the back of
the coffee maker .
service
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
If you need help with:
using your machine or
servicing or repairs
Contact the shop where you bought
your machine.
3